Ceramic Coating Technology Definitions – What sets Opticoat Pro+ Apart

The Science Behind Opticoat

The similarities and differences in coatings available on the market are quite striking. All true coatings are ceramic based, ceramic being a term meaning inorganic. (http://en.wikipedia.org/wiki/Ceramic) Organics such as sealants are carbon based and as such wear away over time, ceramic in itself is permanent, being as it’s inorganic.

Coatings are characterised by their silicon content (not silicone), and 2 principal variations of silicon are used. The most common is Silicon Dioxide, sometimes marketed as glass, quartz or ceramic and in all cases that’s true. SiO2 (http://en.wikipedia.org/wiki/Silicon_dioxide) is suspended in a resin in the form of Nano particles of Silicon Dioxide, and the resins suspend this in a film over the paint. SiO2 has a melting point of 1,600 °C (2,910 °F; 1,870 K) and on the Mohs scale of hardness is a 7 (http://en.wikipedia.org/wiki/Mohs_scale_of_mineral_hardness) .

The other coating system is Silicon Carbide, SiC (http://en.wikipedia.org/wiki/Silicon_carbide). OptiCoat Pro is the only coating available that harnesses the strengths of Silicon Carbide(sometimes referred to as ceramic, industrial diamonds and carborundum). Unlike SiO2 based coatings the SiC based coating actually bonds to the paint and the SiC is formed as a chemical reaction in that process, not by having Nano particles of the ceramic floating in a resin. SiC is superior to SiO2 coatings chemically and has a melting point of 2,730 °C (4,950 °F; 3,000 K) and is a 9 on the Mohs scale of hardness.

Opti-Coat Pro is unique in many ways because of this fundamental difference in chemistry. OptiCoat Pro becomes one with the paint instead of suspending nano particles of a harder substance in a resin. This gives OptiCoat Pro far superior chemical resistance, as the chemical must break down the SiC, and not break down a resin holding SiO2 nano particles. OCP is harder than other coatings, but no coating is scratch proof. To obtain maximum strength other coatings require heat curing and multiple layers, with OCP that’s not required. SiO2 coatings obtain their maximum gloss immediately, and that gloss drops off over time, OptiCoat Pro obtains it’s maximum gloss once the polymerization ( http://en.wikipedia.org/wiki/Polymerization) process is completed (roughly 7 days). OptiCoat Pro will maintain its gloss over time, SiO2 coatings start losing their gloss through oxidation and it continues to drop, requiring the need to add periodically some form of resin to maintain or restore the gloss and protection.

Opticoat banner1024x568